Tension clamp is one type of single tension hardware that used for completing the tensional connection on a conductor or cable,and it provides mechanical support to the insulator and conductor. It is usually used with fitting like clevis and socket eye on the overhead transmission lines or distribution lines.
Bolted type tension clamp is also called dead end strain clamp or quadrant strain clamp.
Depending on the material, it can be divided into two series: NLL series tension clamp is made of aluminum alloy, while the NLD series is made of malleable iron.
NLL tension clamp can be classified by the conductor diameter, there are NLL-1, NLL-2, NLL-3, NLL-4, NLL-5 (the same for the NLD series).
NLL/NLD Series Strain Clamp
Tension clamp refers to the hardware used to fix the conductor to bear the tension of the conductor and hange the conductor to the tension string or tower.
Technical Data:
| Type | U Bolt Qty | Applicable conductor diameter(mm2） |
| NLL-1 | 2 | 5.0-15.5 |
| NLL-2 | 2 | 8.2-17.0 |
| NLL-3 | 3 | 11.4-20.0 |
| NLL-4 | 4 | 13.6-25.0 |
| NLD-1 | 2 | 5.0-10.0 |
| NLD-2 | 3 | 10.0-14.0 |
| NLD-3 | 4 | 14.0-18.0 |
| NLD-4 | 4 | 18.1-23.0 |
Founded in 1994, POWTECH was invested by TAlWAN, is an independent-owned international corporation. Offers an established and effective range of power supply and fiber optical products; and sells to a very broadspectrum of telecommunication and power industry.
Dazhoucun Industrial Park, Chengyang District, Qingdao, China.
Copyright ? 2024 Qingdao Powtech Electronics Co., Ltd. All Rights Reserved.
